Production of hose-type bag films and bags
Improving the flow of material and product quality by discharging

Discharging during the production of hose-type bag film
For trouble-free processing, easy opening of the bags and no electrostatic 'sticking' at the delivery.
Discharging automatic bag machines
Accurate, pinpoint discharging ahead of the stacker, if necessary also during welding and behind the welding beam, results in perfect material flow, even in lightweight film material.
Film production
Less material in film and foil production

Film and foil production without neck-in
Pinpoint charges applied at the exact time when the film smelt hits the chill roll significantly reduces the shrink effect, allows faster machine speeds and results in less material waste after trimming.
Better powder adhesion on surfaces
Electrostatic powder coating of the films compensates differences in material thickness and generates even winding reels for finishing. Saving lamination and antistatic agents.
Winding and Rewinding
Exact core windings
Static charges ensure slip-proof fixation of the film on the core and so guarantee absolutely perfect core windings. No glue or adhesive is needed.

Preventing the telescope effect
Better quality with less trimming waste through static charging. The web is continuously fixed to the idle roller with static charges, winding is absolutely straight-edged and perfect.
Discharging at the contact and turning winder
Optimized discharging prevents dust from settling and smudging on the last reel layer and so prevents the risk of injury when removing the reel and guarantees trouble-free processing.
Injection moulding
Discharging plastic moulded parts after the injection moulding machine

A discharging system in an acrylic tunnel is mounted above the conveyor belt; it operates with air support and is cycled in line with the conveyor belt. Dust settling and ultimate painting problems are a thing of the past.
Laminating and coating
Preventing discharges and accurate fixing in print finishing

Streamlining melamine coating
Static charges prevent the film from slipping. The result: perfect bubble-free coating of the board with higher production speed and less waste.
Discharging film in laminating stations
The use of discharging bars ahead of the printing units, electronic appliances and the laminating station prevents machine disruptions, helps avoid fires and results in the neutral behaviour of the film during run-off.
Trouble-free coating
Electrostatic discharging „along the line“ prevents the formation of orange skin during painting and varnishing. No more sudden and unexpected discharges and no risk of injury.
Cleaning and ionising of plastic components
Discharging and cleaning of plastic components

Cleaning and ionising of plastic components
Ionized air from R35 fishtail nozzles discharges and cleans plastic components in a single operation.
Discharging and removing dirt and dust from three-dimensional plastic components before varnishing them
As the plastic components enter the spray booth, the Static Combi Cleaner cleans them thoroughly, using a combination of pulsing air and discharge electrons, before the parts are coated. The result: a perfect coating.
Ionizing and cleaning workpiece carriers before populating them with highly sensitive components
Before they are populated for the next production step, the carriers run through the Static Combi Cleaner which, in one operation, discharges them of static and cleans off any particles stuck to them.
Removing dirt and dust particles from the inside of plastic bottles before filling them
For safe and complete cleaning of the bottles without water. Ionization is used to eliminate the static attraction and holding forces while the whirling dirt and dust particles are removed.